How to access the configuration page and change the device password on DWR-U2100

1

Connect your DWR-U2100 using a USB Type-C cable or Wi-Fi (from smartphones, laptops, or computers).

-The SSID will appear as D-Link2G-XXXX or D-Link5G-XXXX

-The default Wi-Fi password is printed on the label at the back of the device

2

Once connected, open a web browser and type in the URL bar https://192.168.0.1 and hit enter.

You might see a "Privacy Error" or similar security warning. This happens because the router uses a self-signed SSL certificate, which browsers may not recognize as secure.

Here's how to proceed:

-Click on Advanced at the bottom of the warning page.

-Then, select Continue to 192.168.0.1 (unsafe) to access the router's login page.

If you are hesitant to proceed due to security concerns, you can review the certificate details to verify its issuer and confirm that it is associated with D-Link.

To do this:

-Click the "Not Secure" icon or the padlock symbol (depending on your browser)

-View the certificate details to confirm it was issued by the D-Link manufacturer

3

You will be prompted to enter the username and password to access the router’s settings.

Username: admin

Password: (printed on the device label)

Note: If you have changed the password and cannot remember it, you will need to perform a hard reset on the router

4

To change the admin/device password through the web interface, navigate to More tab, then click Login Settings on the left pane

5

Enter your New Router Username and Password and Confirm the Password, then hit Save to apply the settings.

Last updated