> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/r15/faqs/r15-how-to-setup-operation-modes.md).

# R15-How to setup Operation Modes

{% stepper %}
{% step %}

### Connect your device to the Wi-Fi of the R15 router.

{% endstep %}

{% step %}

### Open a browser and type <http://R15-XXXX.local./> or <http://192.168.0.1> then press Enter

*\*XXXX Last 4 digit of the router’s mac address*
{% endstep %}

{% step %}

### Enter your administrator password.

If you have not changed the default password, check on the configuration card. Click Login.

<figure><img src="/files/VHTXkcg9cMP6IB9B0wtM" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}

#### ROUTER

**Go to Settings > Operation Mode**

* See and Choose the Diagram of the Device as a **Router** mode
* Click **Save**

<figure><img src="/files/MiZnXt91yf8easWBE32o" alt=""><figcaption></figcaption></figure>

#### EXTENDER

**Go to Settings > Operation Mode**

* See and Choose the Diagram of the Device as a **Extender** mode
* Click **Save**

<figure><img src="/files/n83LdrR3cY1ziJls4PQ3" alt=""><figcaption></figcaption></figure>

#### BRIDGE or AP

**Go to Settings > Operation Mode**

* See and Choose the Diagram of the Device as a **Bridge** mode
* Click **Save**

<figure><img src="/files/1pZ3hedPZ5lIpnJZ8xvS" alt=""><figcaption></figcaption></figure>