# DIR-X5460 Initial Setup using Web Configuration
{% stepper %}
{% step %}
### Connect the two antennas to its corresponding connectors on the router.
{% endstep %}
{% step %}
### Power off the modem.
{% endstep %}
{% step %}
Connect the Ethernet cable from the **internet** port of the router and the other end to the\
modem.
{% endstep %}
{% step %}
### Power on the modem.
{% endstep %}
{% step %}
### Power on the router.
{% endstep %}
{% step %}
Connect an Ethernet cable from your computer/laptop to a LAN port (Port 1,2,3 or 4) on\
your router, or connect to the pre-defined wireless network of the D-Link router.
{% endstep %}
{% step %}
Open your Internet browser (Google Chrome/Safari/Internet Explorer/Firefox) and enter\
or [http://dlinkrouter.local](http://dlinkrouter.local/) into the address bar.
{% endstep %}
{% step %}
### Login using the device password indicated on the configuration card.
{% endstep %}
{% step %}
### Click NEXT to continue the setup wizard.
{% endstep %}
{% step %}
Select **Others** if you are connecting the router to an existing router. If not, then select\
your Internet Service Provider then click Next.
{% endstep %}
{% step %}
### Wait until it is done detecting your internet connection.
{% endstep %}
{% step %}
### Select the connection type that your internet service provider requires.
{% endstep %}
{% step %}
Enter the username and password that the internet service provider provided if you\
select Username/Password Connection (PPPoE).
{% endstep %}
{% step %}
### Create your own Wi-Fi name and password then click Next.
{% endstep %}
{% step %}
### Create an admin password to secure your router then click Next.
{% endstep %}
{% step %}
### Select your Time Zone then click Next.
{% endstep %}
{% step %}
### Select Keep my device up to date automatically then click Next.
{% endstep %}
{% step %}
### Take note of the settings that you made then click Next.
{% endstep %}
{% step %}
### Wait until it is done saving.
{% endstep %}
{% endstepper %}
