> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/dir-895l/faqs/how-to-enable-wpa-personal-encryption-on-dir-895l.md).

# How to Enable WPA Personal Encryption on DIR-895L?

{% stepper %}
{% step %}
Open an Internet browser (such as Internet Explorer) and enter <http://dlinkrouter,\\>
<http://dlinkrouter.local> or <http://192.168.0.1> into the address bar.

<figure><img src="/files/49Az9ajFBgxEmNCeYwS4" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Enter your login information. If you have not changed the default settings, the password field\
should be left blank. Click **Login**.

<figure><img src="/files/Z51B8RV8p3mbINi53lja" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click the Settings tab at the top of the page and then click Wireless from the menu list.&#x20;

<figure><img src="/files/SXsdfdL0rACwdq3ieqiA" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select Disabled for Smart Connect.&#x20;

<figure><img src="/files/TPWcX3Wz9cQXWB5L0Cp1" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### 2.4Ghz :

1. Click on Advanced Settings.
2. Select WPA/WPA2-Personal as Security Mode.
3. Enter a Wireless Password beside Password.

<figure><img src="/files/IUPoiufMUHUWqaPA0lHW" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Primary 5Ghz :&#x20;

1. Click on Advanced Settings.
2. Select WPA/WPA2-Personal as Security Mode.
3. Enter a Wireless Password beside Password.

<figure><img src="/files/OI6HybwVHVZRvs7tzqfH" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Secondary 5Ghz :&#x20;

1. Click on Advanced Settings.
2. Select WPA/WPA2-Personal as Security Mode.
3. Enter a Wireless Password beside Password.

<figure><img src="/files/yAbCMYQx7V4i32SAsP1i" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click on Save&#x20;

<figure><img src="/files/wxfUYim0UcbQPDNt0lqY" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}