# How to disable IPv6 of DIR-890L for StarHub?

**Note**: This feature is recommended to be disabled if there are issues trying to access\
internet using Android devices.

{% stepper %}
{% step %}
Open your Internet browser and enter <http://dlinkrouter> or <http://dlinkrouter.local> or\
<http://192.168.0.1> into the address bar.

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2F0ZzWg80RMui6YpexoaP9%2FScreenshot%202026-03-10%20at%2011.28.17%E2%80%AFAM.png?alt=media&#x26;token=132e485c-58fd-4e40-861c-0e6c4eec744d" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Enter your login information. If you have not changed the default settings, the\
username is Admin and the password field should be left blank. Click **Login**.

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2F6aedbsxWTzW68f60CTal%2FScreenshot%202026-03-10%20at%2011.29.25%E2%80%AFAM.png?alt=media&#x26;token=7b56c241-1da1-4bc0-a067-46dccb570a2d" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Click on the **Settings** tab at the top of the page and click **Internet** from the menu as\
shown.

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2F14QBtCTFFlpfHzB8FS7V%2FScreenshot%202026-03-10%20at%2011.30.03%E2%80%AFAM.png?alt=media&#x26;token=fd9b9765-7cbd-4fe4-aa1b-9ea126054872" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### While in Settings > > Internet, select IPv6 tab as shown.&#x20;

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2FGo4wkeJ1XrwbPcV1dCm1%2FScreenshot%202026-03-10%20at%2011.30.24%E2%80%AFAM.png?alt=media&#x26;token=057d4b4f-f251-43cf-9423-e915b856534b" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select Local Connectivity Only from the drop down list of options.&#x20;

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2FmvWQk9ztPKLGoNb3JivC%2FScreenshot%202026-03-10%20at%2011.30.48%E2%80%AFAM.png?alt=media&#x26;token=e523c869-9bca-41cf-ba28-edeb4928c596" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click Save to save settings successfully.&#x20;

{% endstep %}
{% endstepper %}