How do I configure SharePort Web Access on my router?
Note:If using a D-Link Mobile router, SharePort Mobile is only compatible in Router and Wifi-Hotspot Mode
Note: In this example we are using the DIR-506L, however, these instructions can be used on any D-Link router that supports SharePort Mobile
1
Insert your USB Flash Drive into your Router
Router Configuration
2
Log into your router:
Open a web browser and enter the IP address of your router or enter http://dlinkrouter in the address bar. By default the IP address is 192.168.0.1
The default username is admin and there is no password
3
Click on the Setup Tab and click Storage on the left side
4
Check Enable SharePort Web Access and make note of the HTTP Access Port. This Port will be needed to access the SharePort Web Application. By default the port is 8181
Click Save Settings
Accessing SharePort Web Application
5
Open a new web browser and enter the IP address of your router:HTTP Access Port
e.g. http://192.168.0.1:8181
Note: if accessing from the Internet, you need to enter the routers WAN IP : Port
e.g. http://24.12.134.125:8181
