> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/dir-890l/faqs/how-do-i-configure-mac-address-filtering-on-my-router.md).

# How do I configure MAC address filtering on my router?

**Note:** MAC Address filtering is used to control network access based on the MAC Address of the network adapter. This feature can be configured to ALLOW or DENY network/Internet access.

{% stepper %}
{% step %}

### Log into your router

**Blue and White**

**Important Note:** *D-Link routers with the New Blue and White configuration interface* **DO NOT SUPPORT** *traditional MAC Address Filtering. however, you can manually block users once they connect to the network.*
{% endstep %}

{% step %}

### From the Home Tab, click the Connected Clients Icon

{% endstep %}

{% step %}

### Under Connected Clients, click on the Pencil Icon next to the device you want to block

<figure><img src="/files/T821eY33E7yFWLFKqs6H" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click on the Parental Control button to Enable It and Click Save

<figure><img src="/files/hGfvO5lbLX2NJef1Jz26" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### The selected device is now blocked from your network

<figure><img src="/files/4rMOsmtzW6YeQFe0iq8t" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}