Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.
ChatGPT

How to Setup Unifi/Maxis on DIR- (850L/890L/895L/842/878/882)

1

Open an Internet browser (such as Internet Explorer) and enter http://dlinkrouter, http://dlinkrouter.local or http://192.168.0.1 into the address bar.

2

Enter your login information. If you have not changed the default settings, the password field should be left blank. Click Login.

3

Click the Settings tab at the top of the page and then click Internet from the menu list.

4

For DIR-878, DIR-882 Move down if you interface is not the same.

Select PPPoE as My Internet Connection.

  1. Fill in your Username.

  2. Fill in your Password.

  3. Click Save when Done

  4. Wait for the save change notice to show.

  5. Click On VLAN

5

For DIR-878, DIR-882 Move down if you interface is not the same.

  1. Enable VLAN Status.

  2. Fill the VLAN ID According to your ISP Profiles.

  3. Change your LAN Port mapping if needed.

  4. Click Save when Done.

  5. Wait for the save change notice to show.

6

For DIR-842 Move down if you interface is not the same.

  1. Enable VLAN Status.

  2. Change your Servicer Provider to your ISP.

  3. Fill the VLAN ID According to your ISP Profiles.

  4. Change your LAN Port mapping if needed.

  5. Click Save when Done.

  6. Wait for the save change notice to show.

7

DIR-885L, DIR-895L, DIR-890L (New Fw) Move down if you interface is not the same.

  1. Select PPPoE as My Internet Connection.

  2. Fill in your Username.

  3. Fill in your Password.

  4. Enable VLAN Status.

  5. Fill the VLAN ID According to your ISP Profiles.

  6. Change your LAN Port mapping if needed.

  7. Click Save when Done

  8. Wait for the save change notice to show.

8

DIR-850L, DIR-890L Move down if you interface is not the same.

  1. Select Unifi-PPPoE as My Internet Connection.

  2. Fill in your Username.

  3. Fill in your Password.

  4. Fill the VLAN ID According to your ISP Profiles.

  5. Change your LAN Port mapping if needed.

  6. Click Save when Done

  7. Wait for the save change notice to show.

PreviousFAQsNextDIR-880L

Last updated