# How to	configure SharePort Web	Access?

{% stepper %}
{% step %}

### Insert your USB Flash Drive into your router. 

{% endstep %}

{% step %}
Open an Internet browser (such as Internet Explorer) and enter <http://dlinkrouter.local\\>
or <http://192.168.0.1>

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2FHwL5UYyBVQpok8jzqScN%2FScreenshot%202026-03-11%20at%2011.22.33%E2%80%AFAM.png?alt=media&#x26;token=c6a289a5-d706-4bc7-85d4-ca1e150396fb" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
Enter the password for your Admin account in the field provided. If you have not\
changed this password from the default, leave the field blank. Click **Log In**.

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2FzRIudDUwdoeeTbeDOJR1%2FScreenshot%202026-03-11%20at%2011.23.04%E2%80%AFAM.png?alt=media&#x26;token=100a62d1-38fa-41d8-8c64-6d092a1c54df" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
From the network map on the main page, click the USB Device icon to display the\
storage status. The information displayed here should reflect the characteristics of the USB drive plugged into the USB port.

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2F4eK7SQVfTeguPzoRHxoT%2FScreenshot%202026-03-11%20at%2011.27.11%E2%80%AFAM.png?alt=media&#x26;token=a9079a26-fb3f-451e-bd64-c38942d5a1ba" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Open a new web browser and enter \[IP address of your router]:\[HTTP Access Port]\
Example (for local access)- <http://192.168.0.1:8181>

Note: If accessing from the Internet, you need to enter the router’s \[WAN IP]:\[Port]\
Example (for remote access) - <http://24.12.134.125:8181> where your router’s WAN side IP\
address is 23.12.134.125, and the access port is 8181.
{% endstep %}

{% step %}
Enter your router’s Administrator **Username** and **Password**.\
Note: If you have not changed them from the defaults, the username should be Admin, and the password field should be left blank.

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2F3I0uubcI16wI5DLGPfpZ%2FScreenshot%202026-03-11%20at%2011.27.59%E2%80%AFAM.png?alt=media&#x26;token=44c5487b-1bd2-4a86-9b8a-34c20fc02b7e" alt=""><figcaption></figcaption></figure>

Your media will be organized by media type and will be displayed similar to the image below.

<figure><img src="https://4142062250-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FAsNvP4j1V0u2MDOjtqo2%2Fuploads%2FqBVIWyz1EAi7qoc7didh%2FScreenshot%202026-03-11%20at%2011.28.28%E2%80%AFAM.png?alt=media&#x26;token=505b3a62-3ad1-4e20-a07f-eb36d98f464c" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}