# How to configure VLAN on DIR-878?

{% stepper %}
{% step %}
Open an Internet browser (such as Internet Explorer) and enter <http://dlinkrouter,\\>
<http://dlinkrouter.local> or <http://192.168.0.1> into the address bar.

<figure><img src="/files/3CQK24Ktwm54IUVoQ5LD" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Enter your login information. If you have not changed the default settings, the password field should be left blank. Click Login.

<figure><img src="/files/0PKfM1DXlVOO2pkEq0uI" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click the Settings tab at	the top of the page and then click	Internet from the menu list.					&#x9;

<figure><img src="/files/yTCUrNh5rrUu5A9avl9v" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select PPPoE as My	Internet	Connection.

b) Fill in your **Username**.\
c) Fill in your **Password**.\
d) Click **Save** when Done\
e) Wait for the save change notice to show.\
f) Click On **VLAN**

<figure><img src="/files/uMXfp7sS7vgF1FAH6XBt" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Move to Step 6 if you interface is not the	same.

a) **Enable** VLAN Status.\
b) Fill the **VLAN ID** According to your ISP Profiles.\
c) Change your **LAN Port mapping** if needed.\
d) Click **Save** when Done.\
e) Wait for the save change notice to show.

<figure><img src="/files/QYGsMi9E9YKsEYV43wgK" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Enable VLAN Status.

b) Change your **Servicer Provider** to your ISP.\
c) Fill the **VLAN ID** According to your ISP Profiles.\
d) Change your **LAN Port mapping** if needed.\
e) Click **Save** when Done.\
f)  Wait for the save change notice to show.

<figure><img src="/files/Xwp7trrTvl75m3Q20g7w" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.dlink.com.sg/consumer/wi-fi-router/dir-878/faqs/how-to-configure-vlan-on-dir-878.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.