> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/dir-868l/faqs/how-to-enable-ipv6-of-dir-868l-for-starhub.md).

# How to enable IPv6 of DIR-868L for StarHub?

{% stepper %}
{% step %}
Open your Internet browser and enter <http://dlinkrouter> or <http://dlinkrouter.local> or\
<http://192.168.0.1> into the address bar.

<figure><img src="/files/hZ1GYt2U3ANHuanhxUXo" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Enter your login information. If you have not changed the default settings, the\
username is Admin and the password field should be left blank. Click **Login**.

<figure><img src="/files/MyOGqU8M8XjdAgrSMWxV" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Click on the Setup tab at the top of the page and click IPv6 from the menu on the\
left-hand side

<figure><img src="/files/4W7DFCKnJLeHlg1O4Qe3" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select Autoconfiguration (SLAAC / DHCPv6) from the drop down list as shown.&#x20;

{% endstep %}

{% step %}

### Click on Save Settings.

{% endstep %}
{% endstepper %}