> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/dir-868l/faqs/how-do-i-backup-restore-my-configuration-on-my-dir-868l-router.md).

# How do I backup/restore my configuration on my DIR-868L router?

{% stepper %}
{% step %}
Open your Internet browser and enter <http://dlinkrouter>, <http://dlinkrouter.local>, or <http://192.168.0.1> into the address bar.

<figure><img src="/files/Vmh6qkuMd5kjBphv7sGG" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
The default username is Admin. Enter your administrator password. If you have not changed the default password, this field should be left blank. Click Login.

<figure><img src="/files/yp1O2jt6niT2q92DfXS4" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Click the Tools tab on the top and then click System from the menu on the left-hand side.

<figure><img src="/files/GsJhNRhD8ijftCWpFEmx" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
To save the current configuration settings of your wireless router to a file, click **Save Configuration** next to Save Settings To Local Hard Drive. Depending on your browser, the file may be automatically saved to your ‘Downloads’ folder, or a ‘Save File’ or similar dialog box will appear, asking you where you wish to save the file.

<figure><img src="/files/EpYOQB9fzPUCvYlZuqHs" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}

To load a previously saved configuration file, click **Browse** next to Load Settings From Local Hard Drive. Once you have located the file (config.bin) on your hard drive, click **OK** and then click **Restore Configuration From File.**\
&#x20;\
**Note:** If you have upgraded or downgraded the firmware on your wireless router, do not load configuration files that were saved using a previous firmware version. The load will not be successful, and can damage the unit.