> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/dir-2660/faqs/dir-2660-how-to-setup-singnet-vlan-settings.md).

# DIR-2660-How to setup SingNet VLAN settings

{% stepper %}
{% step %}
Connect the second set Covr to computer with lan cable. Open your Internet browser (Internet Explorer/Firefox) and enter <http://192.168.0.1>

<figure><img src="/files/S78zyf6CcZ1o2ELrxsMH" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Enter your Admin Password and tap, Log In

<figure><img src="/files/DFuk71P5GtImW6CtgXve" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Tap on Settings, and then Operation

<figure><img src="/files/ppL5vH2SC95ZEuqUFIcP" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click on VLAN&#x20;

<figure><img src="/files/EPvjXRgR2cvLj4qQ0xl2" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Enable the status and then choose singnet in internet service provider. Click the save the settings.

<figure><img src="/files/71L0VwQliN3el2Ix3k1K" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}