> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/covr-x1870/faqs/how-to-set-up-network-with-covr-singtel-onr-starhub-m1-viewquest-myrepublic-whizcomms.md).

# How to set up network with COVR (Singtel ONR, Starhub, M1, ViewQuest, MyRepublic,WhizComms)

{% stepper %}
{% step %}

### Download the D-Link Wi-Fi app from App store.

<figure><img src="/files/4d11Y8o21SDSbkKQ79kh" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Launch the D-Link Wi-Fi app

<figure><img src="/files/8omkZBiKg5DlNeqmbQx0" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Simply follow the on-screen instructions to complete the installation and the configuration process

(1) Select **COVR-X1870** from the list and tap **NEXT**.\
(2) Setup up New Network

<figure><img src="/files/JRDlQ0npEaxFaspEses2" alt=""><figcaption></figcaption></figure>

(3) Simply follow the on-screen instructions to complete the installation and the configuration process.\
(4) **Please make sure phone is connect to covr Wi-Fi**

<figure><img src="/files/tLG9BU4zATjhOhUxmDzT" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/bwPpR4CEchhaGbmuTLC4" alt=""><figcaption></figcaption></figure>

(5) Select the Internet Service Provider and choose **other** (Singtel ONR, Starhub, M1, ViewQuest, Myrepublic,Wguzcomms) if the ISP was not in the list.\
(6) Select **NO** if don’t have ISP username and password\
(7) Create your own wifi name and password

<figure><img src="/files/VlvOXlGDtNWLKBCGg8G5" alt=""><figcaption></figcaption></figure>

(8) Set the device login password\
(9) Choose firmware upgrade automatically and click Next\
(10)Check the covr setting and click save

<figure><img src="/files/e1oMCg3ul8EnENqLcLuD" alt=""><figcaption></figcaption></figure>

(11)Wait the device save setting\
(12) Place the **Second Covr Point** at any location\
(13)Click finish after device completed setup

<figure><img src="/files/Qr0yQYR0noZkvkh2i0Mk" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}