> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-router/covr-c2202/faqs/covr-2202-how-to-set-up-main-covr-in-bridge-mode-with-second-covr.md).

# Covr-2202 – How to set up Main COVR in bridge mode with second COVR

{% stepper %}
{% step %}
Connect the second set Covr to computer with lan cable. Open your Internet browser (Internet Explorer/Firefox) and enter <http://covr.local./>

<figure><img src="/files/OmUktV1HDpCS0j3St7fN" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Enter your admin password and tap, Log In

<figure><img src="/files/shFqGbBCn2X9j1M2tzfh" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Tap on Settings, and then Operation

<figure><img src="/files/pSuTJpeDasdiFTN0Pd7w" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select Bridge Mode, then tap Save

<figure><img src="/files/3hTkkAJNGn8A8JfgDzoD" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Tap OK

<figure><img src="/files/hdHn774ojosW3IhomLcY" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
Connect the Main set Covr A (Ethernet port) to Second set Covr A (Ethernet port) with network cable. Turn on power socket at second set Covr A, wait the LED light up solid white (within 3-5 minutes). Once the Covr A LED light solid white and it’s completed pair, you can disconnect the network cable from Second set Covr A. Repeat the step for second set Covr B until light up solid white.

<figure><img src="/files/a7CUIKczVUPKcWwDcixM" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}