> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-extender-access-point/e15/faqs/how-do-i-set-up-and-install-my-e15-range-extender-via-webgui.md).

# How do I set up and install my E15 range extender via WebGUI

{% stepper %}
{% step %}
From a wireless computer/device, scan for available networks and connect to the predefined SSID

(Located on the Quick Install Card supplied with the E15 extender and on the bottom of\
the range extender)

\
Example: E15-056F

{% endstep %}

{% step %}
Open a web browser and enter <http://XXXX.devicesetup.net/> in your browser’s URL field\
(where “xxxx” are the last four digits of the E15’s MAC address) or <http://192.168.0.50>

<figure><img src="/files/kkvL78uO9uYXI4gE7rNv" alt=""><figcaption></figcaption></figure>

Go over the Terms of Use And Privacy Policy, tap **Agree**
{% endstep %}

{% step %}

### Select your Language, then Tap Next

<figure><img src="/files/xNdYHfI6fS16o2kBhsDq" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
The range extender will now scan for available wireless networks.\
Select the network you want to extend

<figure><img src="/files/JaIsk7kN1zHGUiKl70xs" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
If the wireless network you wish to extend was detected by the scan, enter the password\
to connect to the network now. If you chose Manual, enter the Wi-Fi Network Name (SSID) and Password of the existing Wi-Fi network you wish to connect to.&#x20;

(See image below for sample)

<figure><img src="/files/535YLfo77KaGmEJjp7op" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
If you want to have the same SSID as your main router for your extended Wi-Fi, put a\
check mark for Clone my existing Wi-Fi name and password, then tap **Next**.

\
**Option 1** Clone existing Wi-Fi name and password

<figure><img src="/files/YjCyhgHZDJAK2YoPza3m" alt=""><figcaption></figcaption></figure>

**Option 2** Not Clone existing Wi-Fi name and password (Separating extended network\
name for extender)

<figure><img src="/files/ClH6RuUb5w4JrOVMLX6A" alt=""><figcaption></figcaption></figure>

Enter a name (SSID) and password for identifying and encrypting your\
extended network.
{% endstep %}

{% step %}
Create a password for the configuration page access, then tap **Next**. (This will be used if\
you want to make changes to the extenders settings in the future.)

<figure><img src="/files/RAuwQBa3Bmm5LuBnnFxF" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select your Time Zone, then tap Next

<figure><img src="/files/LpIzlgL0zSmu9JMwY4Mu" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select Keep my device up to date automatically, then tap Next

<figure><img src="/files/LclLf3cOBIc9lksZe2Or" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Tap Finish

<figure><img src="/files/GRnZxY0J8vvOaKEU71aX" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}