> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-extender-access-point/e15/faqs/how-do-i-set-up-and-install-my-e15-range-extender-via-app.md).
# How do I set up and install my E15 range extender via App
{% stepper %}
{% step %}
Search and install the free EAGLE PRO AI available on the App Store or on Google\
Play.
{% endstep %}
{% step %}
Launch the EAGLE PRO AI from the home screen of your device. Create an account, then\
tap Sign Up with Email.
{% endstep %}
{% step %}
Tap Install New Device. Scan the Setup code on the bottom of the extender. Follow the\
on-screen instructions to complete the setup.
{% endstep %}
{% step %}
Make sure you are connected to your home network, which you would like to extend,\
tap **Next**
\
(Note: This unit supports two different modes, Wireless Extender and Access Point.\
Select **Wireless**, then tap **Select**)
{% endstep %}
{% step %}
Place your Extender between your router and where you want to extend the signal too,\
then tap **Next**
{% endstep %}
{% step %}
### When the status LED turns blinking orange, tap Next
{% endstep %}
{% step %}
Select the Wi-Fi network you are trying to Extend (Ex. Home Network), then tap **Next**
{% endstep %}
{% step %}
Enter in the Wi-Fi password of the network you are extending (Ex. Home Network), then tap **Next**
{% endstep %}
{% step %}
Enter a name (SSID) and password for identifying and encrypting your extended\
network.
{% endstep %}
{% step %}
Create an admin/device password, then tap **NEXT**.
\
*Note: It is strongly recommended that you change the default device password for*\
*accessing the extender’s configuration page.*
{% endstep %}
{% step %}
Give the device a name, for voice commands with Alexa or Google Assistant, then\
tap Next
{% endstep %}
{% step %}
The app will add your device to your D-Link Account, and restart. Tap Finish
{% endstep %}
{% endstepper %}