⌘Ctrlk

Welcome
For Consumer
For Business

👋Welcome!
- M30
- M32
- M60
- DPP-101
- DPP-201
- E15
  Downloads
  FAQs
  Why can I not see the SSID of E15
  How do I change my E15 from Wireless mode to Ethernet backhaul
  How do I enable both 2.4ghz and 5ghz
  How do I set up E15 using the WPS button
  How to change wireless security encryption
  How to access the admin page of the E15 Extender
  How to reset the E15 to factory default
  How to backup & restore configuration
  How to change wireless SSID and Password
  How to setup time zone
  How to change admin password
  How do I set up and install my E15 range extender via WebGUI
  How to update firmware manually on my E15 Extender
  How do I set up and install my E15 range extender via App
  How to create a Mesh Network with Eagle Pro AI Smart Router (R15) & Mesh Extender (E15)
  Introduction to Eagle Pro AI Assistant
  Introduction to Eagle Pro AI App Overview & Features
  Introduction to Eagle Pro AI Parental Control

Powered by GitBook

Wi-Fi Extender/Access Point
E15
FAQs

How do I enable both 2.4ghz and 5ghz

1

Open Eagle AI Pro app

2

Tap E15 device, then select Wi-Fi

3

Tap the Settings/Gear Icon at the upper right corner

4

Look for Smart Connect, then tap the toggle button to enable both 2.4ghz and 5ghz

5

Modified both 2.4/5ghz Wi-Fi network, then Save

PreviousHow do I change my E15 from Wireless mode to Ethernet backhaul NextHow do I set up E15 using the WPS button

Last updated 3 months ago

© 2026 D-Link International Pte Ltd.

Open Eagle AI Pro app
Tap E15 device, then select Wi-Fi
Tap the Settings/Gear Icon at the upper right corner
Look for Smart Connect, then tap the toggle button to enable both 2.4ghz and 5ghz
Modified both 2.4/5ghz Wi-Fi network, then Save