> For the complete documentation index, see [llms.txt](https://support.dlink.com.sg/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.dlink.com.sg/consumer/wi-fi-adapter/dwa-x1850/faqs/how-to-identify-which-wifi-adapter-has-connect-wifi.md).

# How to identify which WiFi adapter has connect WiFi

{% stepper %}
{% step %}

### Click on Control Panel 

<figure><img src="/files/NfAdDGXueGOHTccW5GCR" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click on Network and Internet&#x20;

<figure><img src="/files/0IurA7G59QF0wwpcGvpI" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### &#x20;Click on Network and Sharing Center

<figure><img src="/files/05erehdf3Pj2SPU8EKxL" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Click on Change adapter settings&#x20;

<figure><img src="/files/wGPODhmM8pJx5ethVTmu" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Find the USB adapter DWA-X1850

<figure><img src="/files/63xuHRNybZdvjHMCMHpx" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Right Click the USB Adapter and Click on Connect/Disconnect&#x20;

<figure><img src="/files/hZTPfBFoVdpOZr8nXotw" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Make sure choose correct Wi-Fi adapter DWA-X1850 to connect Wi-Fi&#x20;

<figure><img src="/files/ecOsqgJpEyIBmAP1XcJA" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select the wireless network you want to connect to and click Connect

<figure><img src="/files/MmbdFdU5L4GEyxKvulVz" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}
If you have a password configured on your wireless signal, you will be prompted to\
enter it. Enter the password, then click Next

<figure><img src="/files/EYJfWAhYN43QfoBLa2MT" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### You are now connected&#x20;

<figure><img src="/files/tKTxrAl6RbpNISobFMpL" alt=""><figcaption></figcaption></figure>

{% endstep %}
{% endstepper %}