Connect your PC or smartphone to the DWR-M930 router either via Wi-Fi or using an
ethernet cable.
2
Access the router’s web interface by entering its IP address into a web browser on the
address bar http://192.168.0.1 then press enter.
3
The page will be prompted to enter a username and password. The default username
and the default password are:
Username: admin
Password: (as printed on the device label bottom of the router)
Note: If you have changed the password and cannot remember it, you will need to reset
the router to factory defaults.
4
Once logged in, Click on ‘Features’, then ‘MAC filtering’ on the left side menu.
5
In the MAC filtering section, you’ll find an option to add devices to the MAC filter list
either by selecting connected devices in the drop-down button or manually entering the
MAC addresses.
6
For each device added to the MAC filter list, specify whether you want to allow (whitelist)
or deny (blacklist) devices from accessing your network.
7
Choose ‘Whitelist” if you want to permit the specified device to access the internet or
choose “Blacklist” to block them from accessing the internet.
